Heatshrink Printing Preview
Labor Saving Devices - Drill Bits & Bores
LSDI offers a wide variety of precision drill bits specially engineered for the professional installer. The correct task-specific bits, accessories and drill/bit attachments make any installation project easier and more efficient, and helps the bottom line on any size installation job.
The Rebore-Zit™ drill bit is the only drill bit designed to enlarge a previously drilled hole while retaining the existing wire in that hole. The bit is fabricated with a custom made, hollow bodied drill bit containing a free spinning, swivel eyelet mounted to its pilot hole center shaft. Just secure your existing wire onto the eyelet and re-drill your hole to a larger size. The bit will not twist the wire. Available in 3/8", 1/2", 3/4", 1" (final size of re-drilled hole) diameters. Each diameter has an associated pilot hole size. Use the appropriate Rebore-Zit™ bit to accommodate the pre-existing hole (pilot hole) and step-up in Rebore-Zit™ sizes until you obtain your desired final hole size.
Rebore-Zit Drill Bits 3/8" With 1/4" Pilot LS62-338 - $34.95
Rebore-Zit Drill Bits 1/2" w/ 3/8" Pilot LS62-348 - $52.95
Rebore-Zit Drill Bits 3/4" w/ 3/8" Pilot LS62-368 - $83.95
We developed this unique drill bit to create a curved hole from just below carpet line up into the center of the floor plate in the wall cavity. Avoid the messy and time consuming alternative of removing the base board and chiseling out a path through the wall and the wood floor plate. This tool provides a clean, professional installation when you need to route wire or cable from the floor level up into the wall. Great for slab construction, concrete floors or under-carpet wire applications. The unique function of this tool is a product of our innovative, patented design there is nothing else like it! The study powder coated steel frame directs the specialized cable shaft paddle bit up along an arc into the wall cavity so that you prevent drilling through the opposite wall surface. The Base-Boar-Zit® is now available in two sizes: the standard 5/16" size and the larger 7/16" size to accommodate coax. Each size is shipped as a kit that includes the cable bit with frame, a 10ft. thin fish wire in storage case (to fish your wire or cable through the curved hole) and hex wrench.
Base-Boar-Zit Drill Bits Kit With Fish Wire 7/16" LS63-716 - $119.95
Base-Boar-Zit Drill Bits 5/16 Replacement Bit Only LS63-016 - $29.95
Our MegaBore™ Drill Bits are designed for the installer who is pulling cable bundles or structured wire. These tools offer superior drilling capabilities and performance compared to large diameter auger-type drill bits. These wood boring bits utilize a self-feeding pilot screw that holds the bit firmly in place to avoid "walking" and helps draw the bit through the wood. The MegaBore bits have multiple spurs that increase the cutting performance of the bladed edge. The MegaBore Kit provides optimal versatility for professional installers. The MegaBore™ kit consists of all three sizes of MegaBore™ Bits (1-1/4", 1-1/2" and 1-3/4"), all three sizes of MegaBore Shafts (2ft., 4ft. and 6ft.) and three lengths of 1/4" flexible extension shafts (2ft. x 1/4", 4ft. x 1/4" and 6ft. x 1/4").
- Replaceable feed screws
- Fully reversible
- Can be used with our Flexible Extension shafts to create long shaft lengths
- Special design makes drilling fast and free of splinters
Mega-Bore Drill Bits 1-1/4" Wood Boring Bit LS64-625 - $37.95
Mega-Bore Drill Bits1-1/2" Wood Boring Bit LS64-650 - $40.95
Mega-Bore Drill Bits 1-3/4" Wood Boring Bit LS64-675 - $55.25
Mega-Bore Drill Bits 2ft Shaft For Mega-Bore Bit LS64-552 - $22.95
Mega-Bore Drill Bits 4ft Shaft For Mega-Bore Bit LS64-554 - $23.95
Mega-Bore Drill Bits 6ft Shaft For Mega-Bore Bit LS64-556 - $24.95
The MegaBore Kit provides optimal versatility for professional installers. The MegaBore kit consists of all three sizes of MegaBore Bits (1-1/4", 1-1/2" and 1-3/4"), all three sizes of MegaBore Shafts (2ft., 4ft. and 6ft.) and three lengths of 1/4" flexible extension shafts (2ft. x 1/4", 4ft. x 1/4" and 6ft. x 1/4").
Mega-Bore Drill Bits Kit (Includes above 6 items, plus 61-626,61-726, 61-826) LS64-680 - $234.25
Professional installers consistently choose these drill bits above conventional bellhanger bits and other jobber bits for retrofit installation applications because of superior functionality, high quality construction and dependable performance. These bits have many features that make them your best choice for a wide variety of retrofit situations. High speed steel offers superior functionality. Manufactured in the U.S.A. by Freeform.
- Designed to drill through steel plates as well as wood
- 118° point provides more gradual breakthrough and limits the grabbing that occurs when using a traditional 135° point
- Split point tip and slow spiral design improves bit self-cleaning and eases pull back
- Holes in drill bit head and chuck end for attaching wire
Freeform Drill Bits Premium Freeform Bit 3/8" x 18" LS65-218 - $18.61
Freeform Drill Bits Premium Freeform Bit 3/8" x 24" LS65-224 - $19.17
Freeform Drill Bits Premium Freeform Bits 3/8" x 36" LS65-236 - $19.76
Freeform Drill Bits Premium Freeform Bit 3/8" x 48" LS65-248 - $20.04
Freeform Drill Bits Premium Freeform Bit 3/8" x 58" LS65-258 - $20.61
Freeform Drill Bits Premium Freeform Bit 3/8" x 72" LS65-272 - $21.18
Freeform Drill Bits Premium Freeform Bit 1/2" x 18" LS65-318 - $20.04
Freeform Drill Bits Premium Freeform Bit 1/2" x 24" LS65-324 - $20.61
Freeform Drill Bits Premium Freeform Bit 1/2" x 72" LS65-372 - $22.33
Freeform Drill Bits Premium Freeform Bit 1/2" x 48" LS65-348 - $21.48
Freeform Drill Bits Premium Freeform Bit 1/2" x 58" LS65-358 - $21.76
This high quality percussion masonry bit has a 118° carbide tip for precision feeding and cleaner holes. This bit offers superior strength compared to other masonry bits. Fabricated in U.S.A. by Freeform to our high standards.
Freeform Drill Bits Premium Freeform Masonry Bit 3/8" x 24" LS65-424 - $19.99
Freeform Drill Bits Premium Freeform Masonry Bit 3/8" x 36" LS65-436 - $20.68
This high quality auger bit may become one of your most used drill bits. Fabricated by Freeform using advanced manufacturing techniques, this bit includes an integral lead screw with course threads for precise drilling. The lead screw minimizes bit drift or "walk" and will help "pull" the bit through wood, taking less effort by the installer. The bit is made of a fully heat treated, high quality carbon steel for strength and is formed having wide flutes to carry drill debris and chippings away from the bit head to reduce clogging. The shaft length is 18" with a standard 1/4" diameter shank so it can be used with our 1/4" shank EXT™ Series flexible drill bit extensions.
Freeform Drill Bits Premium Freeform Auger Bit 3/4" x 18" LS65-418 - $22.89
The Reference Point Bit is an extremely small (0.047" diameter) wire bit for preliminary identification of drill bit path. Made of 36" long spring wire, this bit can be cut at an angle and any length to make the smallest "reference" bit. Packaged as a convenient 10-pack.
Reference Wire Bits 10-Pack LS84-547 - $10.95
This versatile and convenient hole cutter enables the professional installer to cut variable size holes with speed, efficiency and minimal clean up. Perfect for cutting multiple speaker or recessed lighting holes, this tool will save you hours of installation time. Simply adjust the hole cutting blade to the desired hole size, mark the desired location of the hole and go to work. A built-in pilot bit enters the target material and centers the cutter in the desired position while the dust tray encloses the cutting arena. Capture the cutting debris as you cut – no more dust cloud with debris everywhere!
Hole Cutter Drill Attachment 1-1/4" to 10-1/4" LS56-000 - $124.95
10" or 12" Metal Cutting Blade LS56-002 - $14.95
You don’t always have the luxury of straight line access. Small spaces, obstructions or difficult approaches can prevent you from drilling or using a power screw driver in many retrofit installation situations. This right angle drill attachment is equipped with a 1/2" Jacobs Chuck and requires only 4-1/2" clearance (excluding bit length). Fits any 3/8" or 1/2" drill, and uses at 1:1 gear ratio. Approx. 5-1/4" long x 4-1/2" wide.