H4A0.31BK - 4:1 Dual Wall Adhesive Shrinkflex® Heatshrink - 5/16" - 4ft Stick - Black

h4a0.31bk
h4a0.31bk

Product Details

Manufacturer:
Techflex
Manufacturer Part #:
H4A0.31BK
Logo csa
Logo rohs
Logo ul
Price BreakUnit PriceExtended Price
1$8.54$8.54
5$7.93$39.65
10$7.32$73.20
25$6.71$167.75
50$6.10$305.00
100$4.88$488.00

Unit Price: $8.54

Total Price: $8.54

Product Details

ManufacturerTechflex
Manufacturer Part #H4A0.31BK

Product Description


4:1 Adhesive Heatshrink

4:1 Adhesive Heatshrink Tubing

Dual wall adhesive lined heatshrink tubing is ideal for producing strong, weathertight seals on any heatshrink installation. During the application of heat from a heat gun or other heat source, the inner adhesive wall melts and flows, creating an adhesion layer to ensure a snug fit to your harness and/or connector. The 4:1 shrink ratio ensure that the tubing will easily install over large plugs or connectors, and shrink down to a tight and weather resistant fit.

SHRINK RATIO: 4:1

SHRINK TEMP: 194°F (90°C)

COLORS: Black & Clear


HEATSHRINK INSTALLATION INSTRUCTIONS


STEP ONE: Measure the Shrinkflex® tubing to length and cut with a scissor. The thickness of your bundle, as well as the desired final appearance, will determine the length of the tubing you cut. Generally, a piece 1 1/2” - 2” long will accommodate almost any need. Single wires, or smaller bundles, require shorter pieces.

STEP TWO: Slip the Shrinkflex® tubing over the bundle and position it so that both the sleeved and unsleeved portions are sufficiently covered. Notice the small pieces of tubing in- stalled on single wires as part of a color coding system. If your project requires multiple operations, always work up from the smallest to the largest bundle.

STEP THREE: Gently apply heat to Shrinkflex® tubing from a heat gun, hair dryer or torch with an appropriate attachment. Keep the heat source far enough away so that hot metal or direct flame does not come in contact with the tubing, wires or sleeving. Move the heat around the bundle to prevent damaging the sleeving and to ensure that all areas of the tubing have been shrunk. Once cooled, your installation is complete.


2:1 DWA Heatshrink
2:1 DWA Heatshrink
2:1 DWA Heatshrink

Technical Specifications

ColorBlack
Nominal Diameters (Fractions)5/16

Total Price: $8.54


 Top of Page