SBC-12R - Sealed Buss Bar - 12 Cavity - Right Angle Bus - Red

Sealed Buss Bars

Have you spent the resources to seal your electrical system at the devices only to leave the job unfinished? With traditional bus bars you have done just that. They have many individual connections which can be prone to failure. They have exposed copper plates that may have tin plating protection or none at all. These plates will corrode which will require replacement. Sure there are sprays that will slow the corrosion down, but it will not address the root cause—exposed metal. The Sealed Bus Bar encapsulates the conductive plate copper leaving the only exposed metal the stainless studs for the connections to the battery.
* Mating Connectors Not Included with Buss Bars.

RATING: 150A @ 48V DC

STUD: 1 @ 5/16-18 Stainless Steel

DIMENSIONS: 2″L x 2-¾”W x 1-⅜”T

DOCUMENTS: Specification Sheet PDF Download

DEUTSCH MATING CONNECTOR: DT06-12SA

AMPHENOL MATING CONNECTOR: AT06-12SA

MOLEX MATING CONNECTOR: 93445-6212

MOUNTING HOLES: #10 Pan head

What Are The Benefits of Sealed Buss Bars?

Got Corrosion? Eliminate It with our innovative design the copper plate is completely encapsulated with only the stainless studs exposed to the elements.

Loose Screws? The innovative design of these sealed buss bars has no screws to loosen over time leaving the connections as solid as the day they are installed.

High Labor Costs? The buss bar design uses a plug and play approach to making connections to the buss bar. Save 2/3 or more of the installation time.

Where Are Sealed Buss Bars Used?

Marine: The bilge environment always has moisture present. Even if it seems dry, there is moisture in the air. Connections to pumps and blowers have been upgraded to sealed connectors but why leave the exposed connections for the bus bar, when a Sealed Buss Bar would be much more reliable.

Off-Road Equipment: Equipment such as front end loaders, skid steers and tractors typically run in muddy conditions. While chassis grounding is popular, the connections to the chassis are the same as the bus bar and will be susceptible to corrosion. Changing to a sealed bus system will provide the next level of protection for longer life with less down time.

Specialty Vehicles: You may never know where your customer is going to take their vehicle, but you can be assured that rain, mud, salt, and snow will be a likely scenario. Provide them with the highest level of protection for their valuable investment. Sealed Bus Bar’s system will take the uncertainty out of the last part of the electrical system.

Off-Road Vehicles: Do you have a golf cart, ATV, side by side? One of the biggest failure points is electrically related. Eliminate the need to clean and tighten connections that can get packed with mud or snow with a Sealed Buss Bar.

Additional Documents

• Solico Sealed Bus Bar Powerpoint (PPT)
• Benefits of Sealed Bus Bars for Resolving Grounding Issues (PDF)
• Sealed Buss Bar FAQs (PDF)