Heatshrink Kits Logo

Heatshrink Tubing Kits

Economical Solution for Your Heat Shrink Needs


Pre-Cut Heatshrinkable Tube

Shrinkflex® heat shrinkable tubing is an effective and economical way to professionally finish the ends of any wire harness application. Typical applications for the heat shrink tube include: electrical insulation, termination, splicing, cable bundling, color coding, strain relief, wire marking, identification, mechanical protection, corrosion protection, abrasion protection and moisture and weather sealing. Glue lined heat shrink tape can be added to create a weather tight and permanent finish.


  • Shrink Ratio: 2:1 and 3:1
  • Shrink Temp: 194°F (90°C)
  • Colors: BK, CL, WH, GY, BL, GN, YL, OR, RD, PP, BR, & Mixed Sets
  • Precut 6 Inch Heatshrink Pieces
  • Kits Are Sorted by Diameter for Easy Identification
  • All Products Are Labeled for Easy Reordering
  • Empty Cases for Your Custom Kits Are Also Available!

We Offer A Variety of Customized Kits

USB Cable Protection Kits: Pre-Cut Heat Shrinkable tubing intended to reinforce the USB cable where the wires meet the connector to prevent damage from bending & strain on the wire.

Lightning Cable Protection Kits: Listen up apple lovers, we've got pre-cut Heat Shrinkable tubing intended to reinforce those delicate Apple lightning cable where the wires meet the connector so you never have to buy a new phone charger again.

Magsafe 1 & 2 Cable Protection Kits: This Pre-Cut Heat Shrinkable tubing is cut specifically to reinforce those expensive Apple MacBook charging cables. No Need to measure, we've done all the legwork for you!

2:1 General Purpose Shrink Kits: These kits include 110 Precut pieces of 2:1 Shrinkflex tubing. Six different diameter options come presorted in each container! This kit is available in all standard 2:1 Color options, as well as some mixed varieties.

3:1 General Purpose Shrink Kits: Similar to the 2:1 kits, These kits include 110 Precut pieces of 3:1 Shrinkflex tubing. Six different diameter options come presorted in each container and these are available in all standard 3:1 Color options, as well as some mixed varieties.

Adhesive Lined Shrink Kits: These kits include 110 Precut pieces of 3:1 Shrinkflex Adhesive shrinktubing (also known as glue lined shrink). Six different diameter options come presorted in each container and these are available in a variety of colors.

WireCare® Master Kit: Can't decide which color pre-made heat shrink kit you want? The master kit includes them all! This complete kit includes 1,100 pieces of 6" precut heatshrinkable tubing.


HOW TO INSTALL SHRINK TUBING

STEP ONE:Measure the Shrinkflex® shrink tubing to length and cut with a scissor. The thickness of your bundle, as well as the desired final appearance, will determine the length of the tubing you cut. Generally, a piece 1 1/2” - 2” long will accommodate almost any need. Single wires, or smaller bundles, require shorter pieces.

STEP TWO:Slip the Shrinkflex® heat shrink tubing over the bundle and position it so that both the sleeved and unsleeved portions are sufficiently covered. Notice the small pieces of tubing in- stalled on single wires as part of a color coding system. If your project requires multiple operations, always work up from the smallest to the largest bundle.

STEP THREE:Gently apply heat to Shrinkflex® heat shrink tubing from a heat gun, hair dryer or torch with an appropriate attachment. Keep the heat source far enough away so that hot metal or direct flame does not come in contact with the tubing, wires or sleeving. Move the heat around the bundle to prevent damaging the sleeving and to ensure that all areas of the tubing have been shrunk. Once cooled, your installation is complete.


Color

Shrink Ratio

Kit Type

22 Products
Filter By...