WMT-AT-8040 - No Slide Multi Bonder Adhesive

Weld Mount No Slide Multi Bonder Adhesive

Weld Mount AT-8040 is a 1:1, meter-mix methacrylate-based structural adhesive. Engineered to bond a variety of materials including thermoplastics, thermosets, composites, and metals, this adhesive shines in versatility. Count on its remarkable adhesion to various metal surfaces like aluminum, galvanized, stainless, and plated steels. Surpassing the strength of PVC, ABS, acrylic, polycarbonate, fiberglass, and many other composites and engineering plastics, it forms robust, high-strength bonds with no surface preparation needed. With a quick 3-4 minute open time, you can expect swift fixture. This non-sag, high-viscosity adhesive, enriched with a special filler, secures anchoring studs and clips to walls and ceilings. Reach for AT-8040 for dependable low-temperature impact and peel strength. This formula is compliant with Reach regulations and is acid-free, ensuring reliability and quality.

Benefits of Weld Mount

Structural adhesive bonding offers a variety of advantages over other joining techniques. First, structural adhesive bonding does not allow for the compromise of the substrate, therefore, there is no room for water ingress. When bonding dissimilar metals, Weld Mount acts as an insulator, eliminating galvanic corrosion. Finally, structural adhesive bonding supports improved fatigue resistance, enhanced resistance to shock and vibration and advanced thermal cycling over mechanical or welded assemblies.

Other Advantages Includes:

1. Increased longevity of products
2. Improved weight reduction
3. Enhanced structural appearance
4. Guaranteed mounting solution
5. Eliminated stress point concentrations
6. Advanced load-bearing capacity

Types of Weld Mount Products

Weld Mount's offering of adhesively bonded fasteners and a wide range of adhesives are designed to be bonded to almost any substrate. We supply wire tie mounts, hose and cable clamps, studs, standoffs and floating nut plates. All our fasteners can be mounted with our unique, no-slide acrylic adhesives. These adhesives hold the parts in place on a vertical or overhead surface, providing a permanent high-strength bond, as well as our many other adhesive choices.

Fasteners: Weld Mount's selection of fasteners is designed to be adhesively bonded to almost any substrate. We offer wire tie mounts, hose and cable clamps, studs, standoffs and floating nut plates. All of our fasteners can be mounted with our unique no-slide acrylic adhesives which hold the parts in place on a vertical or overhead surface, providing a permanent high-strength bond with no need for auxiliary retention or fixturing.

Wire Tie Mounts & Strap Mounts: Weld Mount offers a wide variety of wire tie mount attachment options to solve any wire management challenge. We make these fasteners from a variety of materials to suit different application and load requirements. All of these fasteners can be mounted with our unique, no-slide acrylic adhesives. These adhesives hold the parts in place on a vertical or overhead surface while gathering working strength, providing a permanent high-strength bond. Weld Mount offers a complete line of Stainless-Steel Studs to meet any attachment point challenge.

Standoffs, Nut Plates, &smp; Fasteners: We offer wire tie mounts, hose and cable clamps, studs, standoffs and floating nut plates. All our fasteners are mounted with our unique no-slide acrylic adhesives which hold the parts in place on a vertical or overhead surface, providing a permanent high strength bond.

Cable & Hose Clamps: Weld Mount clamps are available as single or double units. Each is designed to be mounted using our ¼" x 20 Weld Mount studs. The charts below detail the studs required for each size of clamp. The clamps are manufactured of black polypropylene and are temperature rated for -22 to +194 degrees F continuous service. These clamps are available at a per-piece price with no minimum quantities or at a reduced price based on the purchase of bag quantities. Other sizes are available. Maximum hose OD is 1 inch.

Adhesives: The heart of the Weld Mount System is our acrylic adhesives, specifically formulated to be used with our pieces. They are high strength/high viscosity structural methacrylates with incredible strength in both tensile and in shear. We have a range of different adhesives depending on your application requirements. All adhesives are in B-System Cartridges, meaning the nozzle is designed to prevent cross-contamination. This allows for repeated use of a partially emptied cartridge.