Flexo® Noise Reduction

Full Coverage Protection with a Retro Look and Feel


Flexo Noise Reduction

Flexo Noise Reduction is a biaxially braided hybrid sleeving combining monofilament and multifilament PET yarns to create a full coverage expandable sleeve that substantially reduces noise on wires, tubes and hoses. The lightweight, rugged construction also provides protection from abrasion and vibration that is far superior to foam harness sleeves. NR expands for easy installation over splices and connectors and is flexible enough for tight radius applications.

The braided construction will not hold moisture and drains quickly when immersed. NR is used in body wiring harnesses, instrument panel and lighting wiring, cable & hose assemblies, and other limited access applications where noise reduction is desirable.


Full Coverage and Protection for Wire Harnesses
flexo noise reduction application 1

Reminiscent of the cotton loom originally used in antique cars, Flexo Noise Reduction is a modern substitute in any restoration or renovation application that requires resistance to chemicals, abrasion and heat, and provides an easy and economical solution for wire and hose protection.


  • Cuts easily with hot knife
  • Cut & abrasion resistant
  • Expands Up to 150% or More
  • Expands up to 150% for easy installation
  • Provides full coverage, professional look on finished product
  • Halogen free - RoHS compliant
  • Resists common chemicals & solvents
  • FAR 25, FMVSS 302 Approved
  • Resists UV damage
  • Special construction minimizes noise in enclosed applications
  • Operating Temperature Range: -94° to 257 °F (-70° to 125°C.) 446°F./230°C. Melt Temp.

Hot Knives
Benchmount Hot Knife

Cut and seal braided sleeving in one easy step. Using a hot knife to seal the ends of your sleeving results in a clean installation that won't fray or pull apart over time.

From $14.95 each  edg


USING A HOT KNIFE TO CUT BRAIDED SLEEVING
Benchmount Hot Knife

To ensure a frayless, professional end on any installation, it is recommended that expandable sleeving be cut with a hot knife, rope cutter or some similar tool. We offer a wide variety of Hot Knives for different applications. You can find a guide to properly using a hot knife at Wirecare.com's Learning Center.

TERMINATING THE INSTALLATION WITH HEATSHRINK TUBING
Heatshrink termination

Heatshrink Tubing is the ideal way to create a tight, professional finish on any wire, hose or cable management project. Once shrunk, the tubing will hold its reduced state, even at elevated temperatures. Heatshrink terminations are tight and smooth, and the tubing will generally conform to fit around plugs or connectors. You can find a guide to the proper technique for working with heatshrink tubing here.


7 Products
Filter By...

Clear All Filters